blueaussie

Curious who likes which better and why?

Thanks
Craig

tek

For me, i like the best of both worlds..

CARTO TANK it takes a standard carto, but has the tank feature...

https://www.vaporescence.com/shop/eg...ssoriesxm.html

That 3 mill tank i have, i have had since Aguest, and i dont have one complaint, but i wish i had gotten the stainless caps, other then that its a beast, and if you want all you have to do to go back, is drain tank, take tank off and and slide cartomiser condom over the slot in the carto..

I should say i think you mean the tank and atty combo, but i cant comment on that.. i just know what i like bro..

also there are other vendors selling cheaper copies, but imho, you get what you pay for..

blueaussie

Thanks Tek!

tek

Hey bro, i am here to help like i was helped.. Trust me i could go on for days on all of my diss likes and likes..

But the one thing about the liquidnator, it has lips.. Well a ledge, or edge that hangs over the tank slightly, at first i was not thrilled, untill i droped it while attached to a mod, on to a cement floor, yes the edge has a slight mark, but the tank was un touched so total win in my mind after that...

I still want the stainless tho, i got two of the derlin, or aceatate, but heh i am a fan of them and boges.
I do have some dual coils, i got to try them out in the tank, maby this week...
i already know they fit, and like i said, the 3 mill will work universal, the 5. mill takes dual coils, or xls only, but... cool trick, youcan cut the poly carb down if need be lol..

wetwire

I like those tinted ones.. A tank color for each juice. So really.. Are these things not really home brew friendly? Just hate to pay so much for something so simple. Talk about total profit on these things. Like Drip tips.

blueaussie

Hey Tek, you have me sold in the liquinator just undecided about reg. Boge or LR
Thanks Craig

blueaussie

WW, I know what you mean but I don't have that comfort feeling yet for me trying to make something. Usually when I try to build something it turns out a disaster.

Pit Vaper

There are couple of modders making PYREX tanks right now, they are more expensive of course, but you never have to worry about your juice cracking or breaking those polycarbonate or acrylic ones.

blueaussie

I saw those, nice

creote46

Blue, the pyrex ones sound neat. Source? Meanwhile, I'm still with tek. Have had my 3ml Liquinator since July 7. No leaks. Sits on its side on my desk attached to a passthrough. Always use it when at my desk. The supplied cartos were problematic until I realized I had to "jimmy" the contact up a little to work continuously without a glitch. Just wasn't making a clean contact. Also of note, because the clearomizers are a little bigger in diameter they can't be fitted.

Pit Vaper

Yeah, there definitely for the vaper that already has everything

Pit Vaper

Here ya go creote http://phiniac.com/

creote46

Thanks, Pit. Obviously I haven't bought everything yet.

tek

Well it is a matter of preference of course, i would say up to 5 volts use the lr 2.0 or, if you like dual coils, get a dual coil, slot it, and put it in, it works with both, or if you like me, love 6 volts, go with a 3 ohm boge, for a nice 12 watt vape..

The tints are just a sticky film that you apply to the tank, i had one for a while, its cool, but the clear is better imho, but it does keep the poly carb from getting scratched... but its totally up to the indivual, just go to a crafts store and get a lil film lol...

The pyrex are sweet aint they, i just know me and i cant use one yet, i still drop my pv way to many times, and i could not bear the cost. altho they could just be boro glass tempered in a oven, and the glass comes in the diameter, just got to be good at cutting it lol.. And the only things so far i have either hurd of or seen is cinimon, and wintergreen. Now the wintergreen did not spider the polycarb just kinda idk frost maby, just clodied the inside up a lil bit, after 3 days of it in there.. And you can get about 2 feet of the stuff for a free sample at some site, when i find it ill add it but i think its already in the free component thread..

I can do you one better, on cam i show people me shaking it upside down over my key board of my lap top, but the true test, i leave it in my pocket every night, some time it ends up, upside down, and yet no ejuice leaking.. But if you pierce the filler material it will leak, that is what holds the ejuice back, is the polly fill, you have to be care full on how there cut, or just buy the pre cuts, but i am a cheap sob, and i peel my wrappers, put them in my drill and spin em if need be to get the glue off, oh and dont try to unwrap a vaped carto, its a messy thermal glue disaster... just saying

wetwire

Those pyrex ones are pretty neato. Can see why they sold out. I think Robert nabbed one.. maybe from them.

@Tek - Thought those sounded awfully cheap to be tanks.

I completely understand why some tanks, like the Liquinator are more expensive. I just want to try out the whole tank thing in general. Read about some people calling them "airey" Me no likey, airey.

tek

Its all about if you like the boge carto, the tank is not the airey part, but rather the carto, now it can be adjusted by where the tank sits, if i want a tight draw then i slid it all the way down, if i want regular boge draw, <and i like that> i slid it up 1/8th inch, that easy, so the question is do you like boges? but better yet what cartos do you like?