Yep I decided to combine it all in one since betas were released last week.
If you don't know the kick is a little device that actually fits in the mod between the battery and the battery connection. The device allows you to control your mod based on the darwin technology. In other words this will let you control the mod by wattage.
As it is right now as I said the betas went out last week. Right now it is a max of 10watts. That may change. There is also no display or any indication of where you set it except little markings on the potentiometer as of right now.
The way you adjust the wattage on the prototypes is by the potentiometer that sits inside the mod built into a microchip/booster.
The mods that it will be able to fit into are many 18650 mods. Any mod that is telescopic. 18650 box mods would be quite tricky but there is a discussion about another device in the works but as for right now this is pretty much just for tube mods at this point.
If there is not enough room with the standard 18650 battery to add the chip inside the mod like for instance the silver bullet. You will be able to use an 18490 or 18500 battery and place the chip/device in the mod.
This can not be used with other variable voltage devices and this can not be used with stacked batteries.
I do not know the warranty or a confirmed price or for sure which features this will have. They are saying around $45.00 for the price. As we know that is always subject to change before release.
The theory behind this chip/device is not to have another device that is superior to the darwin. With this technology the theory of it is to the ability to actually utilize the tube mods you already have and still provide you with the awesome technology from evolv.
Oh and the best part of this device, it is AMERICAN MADE!!!!!!!!!!!!!!
Here are a few pictures, keep in mind this is the prototype only!!
Here is the thread on ecf!!