Pit Vaper

Don't nick that center airtube, jus' sayin'

wetwire

Well I am thinking the SC to DC is also the difference. The SC must have more filler material where the DC has more taken out to accommodate the extra wire and coil. Also, The placement, up and down, of the slot has got to be part of the problem as well I think. Gonna try another ST DCT carto with the same size slots lower down. The second cut I made was higher up. The thought being, to put it closer to the coil. The more I think about it, that seems like the wrong place. I was shooting for the bottom side of the top coil. See where that could be an issue?

Vapebar

Yeah definitely a difference.

In my experience

Boge LR/SR Cartos = Two Cuts, exactly like the pbusardo vid. They have a more tightly packed filler material.

SmokTech Dual Coils 1.5/2.0/2.5ohm = 1 cut. They have a more loosely packed filler material.

Kangers = 1 slot

Reminds me of another pbusardo vid comparing the Boge to the Kanger. Kanger in a tank are great.

Remembering the regardless of the viscosity of the liquid, you should be able to restrict your draw on the tank and with a few dry pulls have some more liquid in the carto (in the eventuality that your liquid is too thick to wick on its own).

Definitely a juice x device sweet spot to be found.

Have a great weekend everyone.