Dhileas

Folks, I don't generally shill,... Halo but I have been rocking this pipe for a few days and my mind is all over the walls. It packs a radical throat hit for a 3.7v mod! It's called the "Jazz" Cartopipe.

Aesthetics, it's a very nice handmade pipe out of redwood or briar. The mouthpiece is a durable plastic pipe's mouthpiece which covers the cartomizer completely. The copper button is a very nice touch and has a comfortable resistance to the thumb or fingertip. Honestly, I thought it was going to zap me but it doesn't.

I've been vaping it on a protected 16340/RC123a 3.7v, 880mAh UltraFire battery, and the spring is pretty strong inside the bowl so you need to give it a little push to swing the arm over the positive side. I have yet to try it with an 18350, but I should be able to check that out soon. I'm also dying to try it on a 2.2-2.4 ohm clearomizer, which I have coming in. This has easily become my main device. I really get a consistently strong throat hit every time with this pipe mod. So yeah, I'll shill it up! Contact Romaniac here on Vapeatron or over on ECF.

Edit:
By the way, I only recommend 18mg/ml nicotine levels or lower on this pipe. More than that and it's just way too strong. Zero nicotine may give outstanding clouds!

romaniac

Never tested clearomizer on the pipe. i do not know what to say. i hope they are also 9.2 mm diameter

Steampunk

Give or take an RPH...

Dhileas

romaniac

Shadowryder from ECF has made this pipe cover.

Attached Thumbnails

Dhileas

I wonder what materials is that made out of. I kind of liked the clear cap a little more, but that is certainly nice!

romaniac

plastic with a metal contact center

Dhileas

Nice! I wonder how good of a seal it has and how one might make one of those.

romaniac

Contact Shadow Ryder on ECF he makes them

romaniac

How you doing with those? i still belive that you do not have a good seal between the end of the Clearomizer and the mouthpiece silicone seal.

Dhileas

No, there doesn't seem to be a way that I can figure out to do so. I tried cutting the end of one of the "condom caps" out with the carto and fitting that around a couple of the normal cartomizers' caps, but the mouthpiece won't fit with that on. I'll still tinker with some ideas, though.

40bikes

I don't know what you guys are looking at but an 801 soft rubber mouth piece goes on outside a 510 cart and inside obviously an 801 cart,if your looking for a mouthpiece.

Dhileas

The inside of the mouthpiece that is inserted around the cartomizer only really has enough room for the cartomizers with the black or color sticker wrapped on them. Anything more than that is too thick.
That's what she said.

40bikes

I wondered when these were presented if there were stems with sufficient size to accomodate a carto even if line bored. Seemed to me wall thickness might be an issue if routed to fit a carto.
I wonder if the carto length is an issue, does the carto have to bottom out on the mouthpieces seal to get good vapor draw? How about an o ring as a positioning stop. Just thinkin.

romaniac

The inside diameter that houses the cartomizer is 10 mm and yes the pipe is solid.it accommodates up to an CE2R4 XL cartomizer. Because different cartomizer have small variance in length inside of the mouthpiece houses a silicone cap from a regular carto. depending to the exact length of the type of cartomizer you may use that silicon cap will compress more or less against the end of the cartomizer. the reason i choose the cartomizer cap is that most cartomizer users have spare caps from discarded cartomizers reducing replacement cost to zero in case th is lost or damaged.

40bikes

Romaniac, just asking. I think you have a nice product and apparently you are beta testing it. I was interested in the issue after I misunderstood the problem he was having with the clearomiser.

romaniac

I am very happy to discuss any aspect of the pipe with you. I love this types of discussions. I did not take it as a criticism. contrary i think is very constructive.
I am grateful for your interest in my product.

Steampunk

That is a really cool pipe. I think you ought to sell them to Vapeatron members for $39.95...

romaniac

I wish I could Dark Lord but unfortunately i can not.

Steampunk

Sorry. Being an opportunist (spelled c-h-e-a-p-s-k-a-t-e) I had to ask!

romaniac

I understand trying to save for a better sword

Attached Thumbnails

romaniac

The white silicone washer is what we have been talking about. I hope this will give you a more clear view of our conversation yesterday. Believe me when i say that was a pleasure to discuss this with you.

romaniac

Attached Thumbnails

Dhileas

Is that 3DS Max?

romaniac

Google SketchUp, sorry but i am not that professional. My level is enough to give some of my ideas a 3d perspective which helps more than you think

40bikes

Romaniac thanks for the mechanical schematic, love that it is non-electronic; simply electro-mechanical, should be simple for even a simpleton such as myself to keep it up and running. Looks good.