VapeAtron

Thinking of trying one out. Currently use the Super T feeder. Would like a more streamlined option.

Want to be able to use my own attys, no cartos, if possible.

Either way, your suggestions on the currently available best pre-made tank.

Thanks, later!

tek

I have a tank, well several.. As far as atty tanks, i would like to eventually make one, due to the fact that i see a atty tank being much cheaper in the long run, i mean long long run.. At this time i dont have a working atty tank so.. As far as carto currently i hate smoke tech tanks, there too small, and leaky, and crack prone, not the tube but the plastic base.. so those are out imo.. I have had nothing but sucess with the liquidnator from vaporessence, i cant put it down, and it rocks for me.. Also the glass tanks from notcigs are not bad, but dont hold the carto down like the liquidnator.


Also, now that i am in a week short of 16 months, just wanted to send a thank you to you sir, for the family i have gained here..

House3

Im glad you posted this. I was just thinking today about making a post for this same question. There have been 5 different tanks that I have been looking at for the past week trying to decide, I actually settled on and am about to buy the Liquinator as I type this. Coincidence?

donnie55

I've never tried an atty tank, but I find it hard to believe you can beat the flavor and vape of a good carto tank. My mod tank is a liquinator. I have both the delrin and stainless models in 3ml. Standard 2.4-3.0 ohm cartos on my SB and Lavatube. They're the same diameter as the lavatube.

http://vaporescence.com/shop/ego-e-c...ategory_id=134

For my egos, I use the dual coil smok tech tanks with the tank adapters from Madvapes.

http://www.madvapes.com/Dual-Coil-51...ml_p_3446.html

http://www.madvapes.com/eGo-Chrome-C...er_p_3438.html

I enlarge the holes on the smoke tech cartos with a 1/4" saddle tap.

berger

I know people have been having trouble with them but Ive been real happy with the smoke tech tanks especially the 3 ml ones. To me under ten bucks for one tank is more like what they are actually worth and if one cracks...so what...though none have leaked or cracked in a few months so far (at least any thats the tanks fault). Could be luck of the draw but there have been some differences from the first ones and ones I got later...there must be some revisions over time. Im not fooled by the 3ml designation, thats just the exterior volume, add back in the carto and its at least one or so more then that. I pretty much use them on all devices switching around with the smoke tech DCC's 1.5 ohm on the Ipro and 1.7 single coil XL smoke tech cartos on other stuff. Punching my own regular cartos with a drywall screw and turning the carto to the thickest filler side to punch the hole works very well but I do use a high VG % of 90 and up. Im averaging about 2-3 weeks per carto using 2 devices in rotation daily. Im glad to be rid of the frequent dripping through out the day and its much more consistent.
As far as atty tanks go I dont know of any....cant really picture that working right without the filler to modulate the flow automatically and control it when not in the vertical position. I suppose you could create a mod something like the super T model that surrounds the center section like a regular tank but not sure how you would control the dripping easily..I do remember seeing a mod that used a meter controlled pump but I dont even know if that ever took off or is still even made any more.

donnie55

They don't have the flange do they? Do they leak any?

creote46

Like Tek, have a liquinator from VaporEssence. Use it on my pass-through. 6 months on its side on my desk. No leaks, no hassles. Have changed the carto five times. Bought 4 spares, but they clean up great so I've still got 2 unused ones. The price is a little stiff, but filling is fairly easy and no cracks or leaks. Drops on the floor on a regular basis.

berger

I dont use the specific tank cartos for either..I just use the regular ones and punch those as they cost less and I use thicker juices anyway.
As far as leaking goes I have had issues with cartos leaking..never the tank. Thats a hole size issue and making sure you pay attention to which side of the carto you punch and the viscosity of the juice IMO..

Pit Vaper

This new ARRY ACT-V4 seems interesting, here's some pics and a vid.

Video: http://www.youtube.com/watch?v=T3WCt...ecFAAAAAAAAAAA

Attached Thumbnails

Pit Vaper

You can also see some other tank options at http://bigdaddyvapor.com/index.php

berger

sweeet...does it have a window so you can tell how full it is?

RY4

Looks like my honkers.

RY4

Peeping Tom

House3

BDV does have some nice looking steel tanks. I like the way they are labeled. "Slap-yo-Momma" lol

House3

........................ I must be missing something here.

RY4

I had them copyrighted and trademarked so can't use without my permission.

House3

Ah I see now

Pit Vaper

The Big Daddy Vapors SS tanks do have a window slit.

tek

Hey david smith, First i dont know you and this is your first post so i am just going to say this.. Liqudinator is what i have been rocking for 7 months now and its a 3 mill carto tank.. just saying..

RY4

Are you talking to yourself again?? I've told you about those voices... meds increase???

tek

i guess so..

RY4

Would you like the blue pill or the red one

tek

umm, red please with the black stripe..

RY4

Black stripes will give ya the growls... you good with that?

tek

howellllllllllllllllllllllllllllllllllllllllllllll llllllllllllllllllllllllllllllllllllllllll