blueaussie

Purchased a new liquinator from vaporessence, should have done that instead of buying 6 $12.00 leakers.
Anybody want my $12.00 6mil junk, I mean tanks?

Rose

I had the same problem! No I don't want to buy it.

Steampunk

I didn't have any problems with tanks leaking, I just don't like them very much.

Turns out I don't vape as much as I thought I did! (juice stays in 2-3 days...ugh...)

blueaussie

Rose looks like you and I have bad luck...but those that are happy with the will see eventually the poor quality that they are...its just a matter of time after removing caps a few times.

blueaussie

I might try changing the o-rings to a epdm with a different durometer spec. just thinking. Let you know if they work any better!

vapeip

both mine are like 4 months old 1 has had 2 different cartos in it other then one coming part way loose i dont think ive ever had the caps off, I just slide the carto down alil tilt and fill ......... if reasonable I may take them to fiddle with

blueaussie

I know what you mean might as well be 6 gallons right...lol

Steampunk

I fill a regular CE2 approx 3-4 times a day. Or ~6mL. I suppose the tank would work for me but I don't like the flavor.

Shekinahsgroom

Why can't you use a CE2 in a tank?

berger

stormy has CE2 tanks I think..
Man..all these problems with the ST tanks and I havent had any issues other then making the holes too big in cartos causing the leaking myself...
some of the tanks are a little tighter then others but Ive been using the first one for over a month with no problems at all...I guess you could damage the o rings if you werent careful but I dont really see the issues myself..just perplexes me why everybody is having problems when Im usually the one with bad luck..

tek

same here.. i got two st tanks and 3 liquidnators and a glass herpes <its got them boils on it> tank.. work for me and no major issues.

Rocketman

The swamplady has about a week on a 6.5ml plastic tank, and is on her second rejuvenator. No leaks, and she likes it (SHhhhhhhh )

Mswisher6

never cared for tanks myself always a headache...

blueaussie

Steam where do you get your ce2's at?

tek

I have had nuthing but luck with tanks, even the think breakable st ones, but every time i try to make one, i get cut...

blueaussie

Ok I think I have found the flaw, I have two different mfg's and the caps or mixed up one type on top one type on bottom, Maybe that my be my prob. what do yall think?

tek

could be or ya need o rings bro. the seal is important..

blueaussie

Yea went to a place and got new seals but found out when I got home that the 0-rings are metric so the cross section was to thick. Found a place that sells metric o-rings...will try with them tomorrow. Take care Bro. Teker

Robert

I have noticed that o-rings can get damaged by pushing the open end of the carto through them, I think the open ends edges can be a little sharp. So now I either make sure I push it in very straight or I push in the threaded side first.

Also as far as holes, I punch 3 holes 1.5 turns in after the saddel valve breaks through. Stays nice and wet, and dosen't go too deep as to damage the inner tube.

On a side note I'm getting a new Varivapes.com tank made for me. I designed this one. I wanted it to look like a pineapple, for my favorite juice Pineapple from ivape.net

Check it out- Still in mid production

blueaussie

SWEET!
Where do you get your glass tanks, I need to try one of those, thanks for the post.

I thunk you are correct about which end to push through the tanks, inspected mine and they were a little messed up. Got to get some new ones which today I found out they are metric size o-rings. I found a local place here in Houston to get them.

WyldRice

Nice pineapple -in the making!-

I have used the ST tank from ccv and want to order more- no problems here, and hits the best of all my stuff (tanks and cartos)! I've dropped it many times in the past 3 weeks with no problems or leaks- I've only filled it 3 times, so who knows how long it will last?

Rocketman

Go ahead and order the 10 pack of O-rings (carto size).

Steampunk

Basically, whoever has the best price or a sale at the time. I was getting them from madvapes, but he is out of stock a lot on the 510 models, Stormy has some, other than that I can't remember...

Robert

VARIVAPES.COM
HERE- http://www.varivape.com/CloudCity/

Rose

O rings do get damaged if you push stuff through them. I learned that at 18 years of age. Unfortunately it was in a back seat! Just kidding. I like your tank!