 | | 
01-17-2012, 09:12 PM
|
#26 | | Vapezilla Join Date: Oct 2010 Location: Escaping Hades
Posts: 9,815
| Quote:
Originally Posted by Robert  I have noticed that o-rings can get damaged by pushing the open end of the carto through them, I think the open ends edges can be a little sharp. So now I either make sure I push it in very straight or I push in the threaded side first.
Also as far as holes, I punch 3 holes 1.5 turns in after the saddel valve breaks through. Stays nice and wet, and dosen't go too deep as to damage the inner tube.
On a side note I'm getting a new Varivapes.com tank made for me. I designed this one. I wanted it to look like a pineapple, for my favorite juice Pineapple from ivape.net
Check it out- Still in mid production  | Like the swirl of colors on the end. Is the long end piece of glass part of the design? Looks like it would break easily. Trying to figure out which end is which.  | 
|  | |
01-17-2012, 09:43 PM
|
#27 | | Darth Vaper Join Date: Sep 2010 Location: Leftern Mass
Posts: 10,335
| Quote:
Originally Posted by Rose O rings do get damaged if you push stuff through them. I learned that at 18 years of age. Unfortunately it was in a back seat! Just kidding. I like your tank! | 
__________________ Do you mind if I STEAM?!
"well, you see Steam, we never had a rule about it because we didn't think anybody would ever DO it!"
I'm one lab accident away from being a supervillan. I knew that ahole wasn't from jersey...
Now will you all please leave while Dr Berger and I make out the Death Certificates!  | |
| | |
01-18-2012, 03:42 PM
|
#28 | | Senior Member Join Date: Nov 2009 Location: San Diego
Posts: 186
| Quote:
Originally Posted by RY4 Like the swirl of colors on the end. Is the long end piece of glass part of the design? Looks like it would break easily. Trying to figure out which end is which. | This pic is mid production, the bottom is still going top be cut off and a cap put in . These tanks are different than others, only 1 end cap. Look at varivapes.com I think his site explains them | |
| | |
01-18-2012, 05:16 PM
|
#29 | | Senior Member Join Date: Oct 2011 Location: Houston, Tx.
Posts: 731
| Quote:
Originally Posted by Rocketman The swamplady has about a week on a 6.5ml plastic tank, and is on her second rejuvenator. No leaks, and she likes it (SHhhhhhhh ) | Hey Rocket, good Idear, where can I get them bro?
Replacement seal kits I mean for tanks.
__________________
If you can't dazzle them with brilliance, baffle them with bullshit. | |
| | |
01-18-2012, 05:18 PM
|
#30 | | Senior Member Join Date: Oct 2011 Location: Houston, Tx.
Posts: 731
| Quote:
Originally Posted by Rocketman Go ahead and order the 10 pack of O-rings (carto size). | This what I mean, Rocket sorry dude
__________________
If you can't dazzle them with brilliance, baffle them with bullshit. | |
| | |
01-18-2012, 06:57 PM
|
#31 | | awarded title of Sir Arse Join Date: Apr 2009 Location: Louisiana
Posts: 6,669
| I think I got them from CrystalClearVaping. Just the small o-rings that fit the ID of the end caps (carto size).
__________________
A good e-juice, fresh carto, and 3.7 volts from a REALLY REALLY BIG battery works for me. YMMV
Originally Posted by Rocketman
...Quasi was right...Once | |
| | |
01-18-2012, 07:57 PM
|
#32 | | Vapezilla Join Date: Oct 2010 Location: Escaping Hades
Posts: 9,815
| Quote:
Originally Posted by Robert This pic is mid production, the bottom is still going top be cut off and a cap put in . These tanks are different than others, only 1 end cap. Look at varivapes.com I think his site explains them | Thanks robert.. no "s" on the link.. had a wee little trouble getting to Pretty cool and neat you are making your pineapple design. Do they break easily? I drop my stuff or knock it over quite a bit | |
| | |
01-19-2012, 09:49 AM
|
#33 | | Senior Member Join Date: Oct 2011 Location: Houston, Tx.
Posts: 731
| Quote:
Originally Posted by Rocketman I think I got them from CrystalClearVaping. Just the small o-rings that fit the ID of the end caps (carto size). | Thanks Rocket
__________________
If you can't dazzle them with brilliance, baffle them with bullshit. | |
| | |
01-19-2012, 03:09 PM
|
#34 | | Senior Member Join Date: Nov 2009 Location: San Diego
Posts: 186
| Quote:
Originally Posted by RY4 Thanks robert.. no "s" on the link.. had a wee little trouble getting to Pretty cool and neat you are making your pineapple design. Do they break easily? I drop my stuff or knock it over quite a bit | whoops, I didn't make it I just told them what I wanted. It is very thick glass, but it might break. i haven't dropped it yet, knocked it over on the table- ok so far | |
| | |
01-19-2012, 04:57 PM
|
#35 | | Vapezilla Join Date: Oct 2010 Location: Escaping Hades
Posts: 9,815
| Quote:
Originally Posted by Robert whoops, I didn't make it I just told them what I wanted. It is very thick glass, but it might break. i haven't dropped it yet, knocked it over on the table- ok so far | Still your design idea right? I'm bad to stand my PVs upright then knock it over, have dropped on my floor a few times, slung an e-power pv across the cement patio, then decided to flick out the window of my moving car an ego then e-power.... so I'm I wee bit tough on them.  They have all survived though. | |
| | |
01-20-2012, 10:26 AM
|
#36 | | Senior Member Join Date: Oct 2011 Location: Houston, Tx.
Posts: 731
| Quote:
Originally Posted by Rocketman Go ahead and order the 10 pack of O-rings (carto size). | Hey Rocket I got lucky, went buy a place in Houston that sells packing for pumps, plungers and they carry metric o-rings, they gave me a dozen inner and outer o-rings that are an exact match.
__________________
If you can't dazzle them with brilliance, baffle them with bullshit. | |
| | | |
| |
