 | 
03-09-2011, 10:51 PM
|
#1 | | Darth Vaper Join Date: Sep 2010 Location: Leftern Mass
Posts: 10,335
| PRELIMINARY: This may be the Big Battery mod you have been looking for. It is a 5 piece e-cig that uses an 18650 battery. The manufacturer lists it as 3000mah, but real world it will probably yield 2200-2600 mah. Nonetheless, that amounts to a full day of hypervaping, or up to 4 days casual use (That's what I get from the 18650 mods I have built).
Pricing from the factory is given at ~$35 for one piece, but remember you're ordering from China so bear in mind shipping costs.
The unit consists of a battery bottom housing, battery, housing top and switch, adapter/connector, atomizer and cartridge. I would imagine using 510 style cartomizers will not be a problem.
The one problem I do see is that this uses something like an eGo style MOSFET circuit, which is usually Pulse Width Modulated yielding 3.2V in most cases. This is probably done more for making it rechargeable, although with a separate battery I don't see the need, and also allows for a low current switch to control the output.
If it were me I would do away with the circuit board. The manufacturer says to use PROTECTED batteries in this device anyway, so I would just use a straight mechanical switch and get the whole output from the battery (nominally 4.2V at a full charge, useable voltage ~3.9-3.2V) and eliminate a failure point, especially when combined with low resistance atomizers or cartomizers.
Still, this is a slick looking piece at a decent price for big battery convenience. More info when models start showing up around.
Main Technical parameter Product model:
Model: BW-155D
Main engine size: 19*187mm
Diameter 19mm/length 187mm
Batt 3000 mAh
__________________ Do you mind if I STEAM?!
"well, you see Steam, we never had a rule about it because we didn't think anybody would ever DO it!"
I'm one lab accident away from being a supervillan. I knew that a hole wasn't from jersey...
Now will you all please leave while Dr Berger and I make out the Death Certificates! 
Last edited by berger; 03-11-2011 at 04:31 PM..
| 
|  | | |  | |
03-10-2011, 09:11 AM
|
#3 | | Couldnt take it anymore Join Date: Sep 2010 Location: Mod impersonation carries a stiff penalty YKWYA
Posts: 10,788
| Wheres the pictures!?!
"and eliminate a failure point"
going to remove the atty too? 
Ya sure this isnt the new for 2011 BW155D?:
states 3000 mAh, comes with 2 batteries?
__________________ 
Last edited by berger; 03-10-2011 at 11:13 AM..
| |
| | |
03-10-2011, 01:22 PM
|
#4 | | Darth Vaper Join Date: Sep 2010 Location: Leftern Mass
Posts: 10,335
| Quote:
Originally Posted by berger  Wheres the pictures!?!
"and eliminate a failure point"
going to remove the atty too?
Ya sure this isnt the new for 2011 BW155D?:
states 3000 mAh, comes with 2 batteries? | I'll save page space...you know what's coming...
__________________ Do you mind if I STEAM?!
"well, you see Steam, we never had a rule about it because we didn't think anybody would ever DO it!"
I'm one lab accident away from being a supervillan. I knew that ahole wasn't from jersey...
Now will you all please leave while Dr Berger and I make out the Death Certificates! | |
| | |
03-10-2011, 02:07 PM
|
#5 | | Couldnt take it anymore Join Date: Sep 2010 Location: Mod impersonation carries a stiff penalty YKWYA
Posts: 10,788
|
__________________
Last edited by berger; 03-10-2011 at 02:47 PM..
| |
| | |
03-10-2011, 02:09 PM
|
#6 | | I like it hot and wet! Join Date: Nov 2010 Location: Tonganoxie, KS
Posts: 2,168
| How about eliminating the failure point by having dual atty's?
__________________
Take me out to the black
Tell them I ain't comin' back
Burn the land and boil the sea
You can't take the sky from me | |
| | |
03-10-2011, 02:39 PM
|
#7 | | Couldnt take it anymore Join Date: Sep 2010 Location: Mod impersonation carries a stiff penalty YKWYA
Posts: 10,788
| that would be double weaknesses...... for him LOL
__________________ | |
| | |
03-10-2011, 03:03 PM
|
#8 | | Darth Vaper Join Date: Sep 2010 Location: Leftern Mass
Posts: 10,335
| Quote:
Originally Posted by berger Oh let me see..I'll take a wild quess and say something like this :  | Pretty much right on the money, I'd say... Quote:
looked around Bauway's site and I am pretty sure this is what your talking about...you didn't link so Im not sure where you got that info from but it doesn't match their site..?
I threw up the picture and figured you could change it to fit the model section format and delete all these extraneous posts
unless you prefer I fixed it...doesn't really matter so long as the model guide is correct
| I took the info from AAKuang's post, which led to Alibaba. However, I didn't use Firefox's downloader to grab the pic. Nice job. Like I said, when there's more info, it'll go here.
__________________ Do you mind if I STEAM?!
"well, you see Steam, we never had a rule about it because we didn't think anybody would ever DO it!"
I'm one lab accident away from being a supervillan. I knew that ahole wasn't from jersey...
Now will you all please leave while Dr Berger and I make out the Death Certificates! | |
| | |
03-10-2011, 03:10 PM
|
#9 | | Couldnt take it anymore Join Date: Sep 2010 Location: Mod impersonation carries a stiff penalty YKWYA
Posts: 10,788
| Actually I had to modify it from a png.
__________________ | |
| | |
03-10-2011, 04:53 PM
|
#10 | | Couldnt take it anymore Join Date: Sep 2010 Location: Mod impersonation carries a stiff penalty YKWYA
Posts: 10,788
| Heres more information when available: Bauway BW 155D BW 155D
__________________
Last edited by berger; 03-10-2011 at 04:57 PM..
| |
| | |
03-10-2011, 05:13 PM
|
#11 | | Senior Member Join Date: Sep 2010 Location: Philadelphia
Posts: 481
| Quote:
Originally Posted by berger |
I can tell your right now there are some QA issues with the 3000mah from Bauway. This is why we haven't started to carry these quite yet. They are currently working out the quirks. But we have great success with our 1300mah batteries and will be carrying the 3000mah soon once QA gets things straight.
Just a little heads up for you guys | |
| | |
03-10-2011, 05:15 PM
|
#12 | | Couldnt take it anymore Join Date: Sep 2010 Location: Mod impersonation carries a stiff penalty YKWYA
Posts: 10,788
| Johnny..what other Bauway Models do you carry?
__________________ | |
| | |
03-10-2011, 05:21 PM
|
#13 | | Senior Member Join Date: Sep 2010 Location: Philadelphia
Posts: 481
| Quote:
Originally Posted by berger Johnny..what other Bauway Models do you carry? | 510 pcc kit
And... our 1300mah eGo is through Bauway.
We personally love Bauway and the team over there. There QA is top notch and they won't release a product until fully tested for quite some time.
Believe it or not we haven't had one single return on our PCC kits and we have a hard time keeping these in stock.  | |
| | |
03-11-2011, 09:06 PM
|
#14 | | Dismembered Join Date: Dec 2009 Location: USA
Posts: 759
| Quote:
Originally Posted by Steampunk ... The one problem I do see is that this uses something like an eGo style MOSFET circuit, which is usually Pulse Width Modulated yielding 3.2V in most cases. This is probably done more for making it rechargeable, although with a separate battery I don't see the need, and also allows for a low current switch to control the output. | It's odd how you see Janty's approach to regulating the battery's output as a 'problem'.
It was the original Joye 510 that changed the game and put the term 'throat hit' on the map. SLB/DSE made the first knock-off, it wasn't a clone by any means as it was still a high ohm atty like their 801/901s.
Janty's new design strove for a regulated vape, and the cone was a way to keep and use the atty body's heat to pre-warm the incoming air and the insulating nature of the cone should keep the vapor from cooling as fast. Hence maximizing the lower watts.
And they did get extended and consistent vape times, plus a bit more actual heat/temperature from their atties. Quote:
Originally Posted by johnny | Which basically means it's not an eGo, just a knock-off.
It's a shame that retailers have to resort to selling a 2nd tier product by trading on Janty/Joye's name.
Last edited by JohnnyJames; 03-11-2011 at 09:12 PM..
| |
| | |
03-11-2011, 09:52 PM
|
#15 | | Atty Smasher Join Date: Mar 2011 Location: Leftern Mass
Posts: 45
| Quote:
Originally Posted by JohnnyJames It's odd how you see Janty's approach to regulating the battery's output as a 'problem'.
It was the original Joye 510 that changed the game and put the term 'throat hit' on the map. SLB/DSE made the first knock-off, it wasn't a clone by any means as it was still a high ohm atty like their 801/901s.
Janty's new design strove for a regulated vape, and the cone was a way to keep and use the atty body's heat to pre-warm the incoming air and the insulating nature of the cone should keep the vapor from cooling as fast. Hence maximizing the lower watts.
And they did get extended and consistent vape times, plus a bit more actual heat/temperature from their atties. | I'm seeing the MOSFET as a point of fail, esp for those that like to use LR atties/cartos. It seems that some of these MOSFET circuits are not up to the task of lower resistance. Maybe that's changed...hopefully Quote:
Which basically means it's not an eGo, just a knock-off.
It's a shame that retailers have to resort to selling a 2nd tier product by trading on Janty/Joye's name.
|
__________________
Do you mind if I STEAM?!
(I get bored easily...) | |
| | |
09-15-2011, 01:42 AM
|
#16 | | Junior Member Join Date: Aug 2011 Location: Everywhere you can image
Posts: 13
| Guys above,Lydia here from Bauway.com .You should try our BW-510N with 3000mah manual battery(18650battery).This model can be in stainless steel,in wood color or even camouflage | |
| | |
12-06-2011, 03:18 AM
|
#17 | | Junior Member Join Date: Dec 2011 Location: The Bay State
Posts: 19
| Now that's a monster! | |
| | | 
| |
